	Service of Audi A4 from 2001 to 2005 release.
		1. Operation and maintenance of the car
		2. Engine
		3. Transmission
		4. Running gear
			4.1. Wheels and tires
			4.2. General information about a running gear of the car
			4.3. Repair of a suspension bracket of forward wheels
			4.4. Back suspension bracket
			4.5. Tables
		5. Steering mechanism
		6. Brake system
		7. Onboard electric equipment
		8. Body
		9. Schemes of electric equipment

4-khodovaya-chast.html

4. Running gear

Wheels and tires

General information on wheels and tires

Specifications for re-equipment of disks and tires

Indexes of speed of tires

Marking on disks

Wear and hodimost of tires

Wear of high-speed tires

Service of tires

Evenly worn-out tires

Measurement of height of the drawing of a protector

Unilateral wear

Diagonal uneven wear

Noise of swing of tires

Radial and side beating of wheels and tires

Check of a radial and side beating of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435

Side withdrawal of the car

Elimination of side withdrawal

Damages of tires

Design of the radial tire

Loss of pressure of air in tires

Damages of tires because of mistakes when mounting (assembly damages)

Marking of a sidewall of the tire

Shift of wheels

Instructions on replacement and installation of wheels

Change of tires

Removal and installation of the case of the metal gate

General information about a running gear of the car

Leakage of shock-absorbers

Noise in shock-absorbers

Check of the removed shock-absorber

Check of shock-absorbers at the damping stand

Dynamic-Ride-Control system (DRC II)

Forward depreciation rack

Check of pressure in the DRC II system

Repair of a suspension bracket of forward wheels

General provisions

Wheel support loading own mass of the car

Removal and installation of a depreciation rack

Repair of a depreciation rack

Removal of a screw spring

Installation of a screw spring

Removal and installation of the case of the stupichny bearing

Repair of a rotary fist with the installed hug bearing

Removal and installation of the top lever

Replacement of forward and back support of the top levers

Removal and installation of a stretcher

Replacement of support of a stretcher

Removal and installation of persistent wedges of rubber-metal support

Removal and installation of the stabilizer

Back suspension bracket

Removal and installation of a twisted spring

Removal and installation of the shock-absorber

Table 4.1. Identification of parameters of a disk

Table 4.2. The ordered serial pressure of air depending on extent of loading at cold tires

Table 4.3. Admissions of a radial and side beating of disks with tires

Table 4.4. Nominal rates of a radial and side beating of a wheel

Table 4.5. Explanation of the size of tires

Table 4.6. Alphabetic references of an index of speed / the most admissible speed

Table 4.7. Index of loading of tires

Table 4.8a. A shock-absorber piston stroke (cars with number VIN to 400 000)

Table 4.8b. A shock-absorber piston stroke (cars with number VIN from 400 001)

3.5.2. Table 3.2. Alphabetic references, compliance to the unit, transfer numbers, volumes of gas station of mechanical transmissions (front-wheel cars)

4.1. Wheels and tires