Service of Audi A4 from 2001 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
	3. Transmission
	4. Running gear
		4.1. Wheels and tires
		4.2. General information about a running gear of the car
		4.3. Repair of a suspension bracket of forward wheels
			4.3.1. General provisions
			4.3.2. Wheel support loading own mass of the car
			4.3.3. Removal and installation of a depreciation rack
			4.3.4. Repair of a depreciation rack
			4.3.5. Removal of a screw spring
			4.3.6. Installation of a screw spring
			4.3.7. Removal and installation of the case of the stupichny bearing
			4.3.8. Repair of a rotary fist with the installed hug bearing
			4.3.9. Removal and installation of the top lever
			4.3.10. Replacement of forward and back support of the top levers
			4.3.11. Removal and installation of a stretcher
			4.3.12. Replacement of support of a stretcher
			4.3.13. Removal and installation of persistent wedges of rubber-metal support
			4.3.14. Removal and installation of the stabilizer
		4.4. Back suspension bracket
		4.5. Tables
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

4-3-14-snyatie-i-ustanovka-stabilizatora.html

4.3.14. Removal and installation of the stabilizer

Removal

Remove a noise-insulating board:

Fig. 4.56. Compression of the hinge of the top levers

Unscrew the screw 2 (fig. 4.56).

Fig. 4.101. Fastening of the stabilizer

Turn off six-sided nuts of 2 (fig. 4.101).

Remove the stabilizer

Installation

The stabilizer and support have to be fat-free.

NOTE

When replacing the stabilizer pay attention to execution of a running gear.

Twist new nuts 2, but do not tighten (fig. 4.101).

Tighten the new screw 2 (fig. 4.56).

Tighten nuts 2 with the moment of 25 N · m.

Establish a noise-insulating casing.