|
4-1-28-snyatie-i-ustanovka-korpusa-metallicheskogo-ventilya.html
4.1.28. Removal and installation of the case of the metal gatePass the metal gate with rubber consolidation through a rim from within.
Put on outside a podkladny washer, a cap nut and tighten.
Fix from a provorachivaniye an emphasis 1 (for example, a drill with a diameter of 2 mm) (fig. 4.34).
Press the electronic equipment of a wheel 1 into depth of a rim and fasten behind on the gate the microencapsulated bolt (fig. 4.35).
|