Service of Audi A4 from 2001 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
	3. Transmission
	4. Running gear
		4.1. Wheels and tires
		4.2. General information about a running gear of the car
		4.3. Repair of a suspension bracket of forward wheels
			4.3.1. General provisions
			4.3.2. Wheel support loading own mass of the car
			4.3.3. Removal and installation of a depreciation rack
			4.3.4. Repair of a depreciation rack
			4.3.5. Removal of a screw spring
			4.3.6. Installation of a screw spring
			4.3.7. Removal and installation of the case of the stupichny bearing
			4.3.8. Repair of a rotary fist with the installed hug bearing
			4.3.9. Removal and installation of the top lever
			4.3.10. Replacement of forward and back support of the top levers
			4.3.11. Removal and installation of a stretcher
			4.3.12. Replacement of support of a stretcher
			4.3.13. Removal and installation of persistent wedges of rubber-metal support
			4.3.14. Removal and installation of the stabilizer
		4.4. Back suspension bracket
		4.5. Tables
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

4-3-13-snyatie-i-ustanovka-upornykh-klinev-rezinometallicheskikh-opor.html

4.3.13. Removal and installation of persistent wedges of rubber-metal support

Removal of a support of a stretcher

Extend persistent wedges from rubber-metal support in a downward direction.

Installation

Fig. 4.100. Installation of persistent wedges

Press persistent wedges 1 in rubber-metal support before contact (see fig. 4.100).

In the figure 4.100 the stretcher from below is shown.

Installation of a support of a stretcher.