Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. General information on wheels and tires
4.1.2. Specifications for re-equipment of disks and tires
4.1.3. Indexes of speed of tires
4.1.4. Marking on disks
4.1.5. Compound disks
4.1.6. Wear and hodimost of tires
4.1.7. Wear of high-speed tires
4.1.8. Service of tires
4.1.9. Evenly worn-out tires
4.1.10. Measurement of height of the drawing of a protector
4.1.11. Unilateral wear
4.1.12. Diagonal uneven wear
4.1.13. Noise of swing of tires
4.1.14. Balancing
4.1.15. Radial and side beating of wheels and tires
4.1.16. Check of a radial and side beating of a disk with the tire by means of the indicator of hour type for tires V.A.G 1435
4.1.17. Minimization
4.1.18. Side withdrawal of the car
4.1.19. Elimination of side withdrawal
4.1.20. Damages of tires
4.1.21. Design of the radial tire
4.1.22. Loss of pressure of air in tires
4.1.23. Damages of tires because of mistakes when mounting (assembly damages)
4.1.24. Marking of a sidewall of the tire
4.1.25. Shift of wheels
4.1.26. Instructions on replacement and installation of wheels
4.1.27. Change of tires
4.1.28. Removal and installation of the case of the metal gate
4.2. General information about a running gear of the car
4.3. Repair of a suspension bracket of forward wheels
4.4. Back suspension bracket
4.5. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 







4-1-20-povrezhdeniya-shin.html

4.1.20. Damages of tires

General instructions
Damages of tires can cause serious consequences therefore the driver and the master serving the car have to check regularly their state for early detection of possible defects.
The having damages of the tire will not be able to sustain such road situations as the high speed, long distances, sports driving and other.
Damage can be caused by various reasons.
Driving with insufficiently rolled tires.
Mistake when mounting.
Damage because of arrival on an obstacle.
Aging.
Wrong storage.

ATTENTION
If the threat to security is not excluded, then the tire needs to be replaced.


4.1.19. Elimination of side withdrawal

4.1.21. Design of the radial tire