Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.2. Doors, locks of doors and hatch of a roof
8.3. Body glazing
8.3.1. Removal and installation of the sensor of a rain
8.3.2. Removal of a windshield
8.3.3. Preparation for glass installation
8.3.4. Installation of a windshield
8.3.5. Removal of the intact side glass
8.3.6. Preparation for glass installation
8.3.7. Installation of side glass
8.3.8. Removal of the intact back glass
8.3.9. Removal of the broken back glass
8.3.10. Preparation for glass installation
8.3.11. Installation of back glass
9. Schemes of electric equipment
 







8-3-9-udalenie-razbitogo-zadnego-stekla.html

8.3.9. Removal of the broken back glass

ATTENTION
At glass removal surely use goggles and leather gloves.

Cover a body and salon from glass splinters.
Remove the glass remains in an aperture to a glue layer.

Fig. 8.117. Plugs of the antenna and amplifier


Remove plugs of 1 antenna and the amplifier (fig. 8.117).
Remove connections of wires of heating of glass.
Paste over edge on perimeter with an adhesive tape on a textile basis.

Fig. 8.118. Sealant glue cutting


1 cut glue-sealant (from the glass remains) in a glass aperture by means of an electroknife and a knife with a persistent roller (fig. 8.118).


8.3.8. Removal of the intact back glass

8.3.10. Preparation for glass installation