8.3.11. Installation of back glass

After the end of preparatory work it is necessary to apply glue.

Fig. 8.99. Putting glue

Establish a nozzle by all surface 2 on glass (fig. 8.99).

The direction of drawing – the shooter (fig. 8.99).

NOTE Section of the glue roller 1 is defined by an opening of a nozzle and speed of drawing.

Fig. 8.100. Putting glue on perimeter

Apply glue-sealant on perimeter according to the drawing (fig. 8.100).

Consider various distance to the edge of glass.

Insert back glass into an aperture by means of two double vacuum captures.

ATTENTION Glass needs to be inserted within 15 min. after putting glue as differently its gluing properties will decrease.

Level glass in the cross direction.

The distance from the edge of glass to a frame of a roof has to make 6,5 mm.

Observe hardening time.