Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.2. Doors, locks of doors and hatch of a roof
8.3. Body glazing
8.3.1. Removal and installation of the sensor of a rain
8.3.2. Removal of a windshield
8.3.3. Preparation for glass installation
8.3.4. Installation of a windshield
8.3.5. Removal of the intact side glass
8.3.6. Preparation for glass installation
8.3.7. Installation of side glass
8.3.8. Removal of the intact back glass
8.3.9. Removal of the broken back glass
8.3.10. Preparation for glass installation
8.3.11. Installation of back glass
9. Schemes of electric equipment
 







8-3-7-ustanovka-bokovogo-stekla.html

8.3.7. Installation of side glass

Cars with side glass with consolidation
Insert glass at a rack of D below and establish in an aperture.
Consolidation of side glass has to be linked behind a decorative level of a roof
Record glass in an aperture by means of an adhesive tape.
Observe hardening time.

Cars with a package of the chromeplated slips
Press a decorative level of a roof in fixing brackets at a rack of D.
Press a slip 1 in brackets 2 at a rack of D and a sidewall below (fig. 8.108).

Fig. 8.108. Extraction of a decorative level


Establish glass on a sidewall below and press to an aperture.
Record glass in an aperture by means of an adhesive tape.
Establish the top overlay of a rack In at a decorative level of a roof and insert a slip 1 sideways into a fixing bracket (fig. 8.107).

Fig. 8.107. Sticking up of a decorative level


Observe hardening time.


8.3.6. Preparation for glass installation

8.3.8. Removal of the intact back glass