Replacement of an epiploon of the crankshaft from the chain drive. Audi A4 (from 2001 to 2005 release)
Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
2.1. General information
2.2. Predvaritlny checks
2.3. Mekhanichsky part (petrol engines 2,0l)
2.4. Lubrication system
2.5. Cooling system
2.6. System of injection
2.7. System of production of the fulfilled gases
2.8. Mechanical part (petrol engines 3,0; 3,2 l)
2.8.1. Number of the engine
2.8.2. Removal and installation of a poliklinovy belt
2.8.3. Removal and installation of a damper of tortional fluctuations
2.8.4. Removal and installation of a forward sealing flange of the crankshaft with a crankshaft epiploon
2.8.5. Removal and installation of a two-mass flywheel (cars from the manual transmission)
2.8.6. Removal and a press fitting of the needle bearing of a two-mass flywheel (cars from the manual transmission)
2.8.7. Removal and installation of the conducted disk (cars with the automatic transmission)
2.8.8. Replacement of an epiploon of the crankshaft from the chain drive
2.8.9. Removal and installation of the left and right covers of driving chains
2.8.10. Removal and installation of the lower cover of a driving chain
2.8.11. Camshaft drive
2.8.12. Removal of the chain drive from cam-shafts, removal and installation of a natyazhitel of a chain
2.8.13. Removal and installation of a chain of the drive of the oil pump and balancer shaft
2.8.14. Removal and installation of the balancer shaft
2.8.15. Removal and installation of a bent shaft
2.8.16. Conrod and piston group
2.8.17. Check of a radial gap of rods
2.8.18. Check of a compression
2.8.19. Removal and installation of cam-shafts
2.8.20. Replacement of oil scraper caps
2.8.21. Check of basic elements with hydrocompensators
2.8.22. Check of the directing plugs of valves
2.9. Mechanical part (petrol engines of 4,2 l)
2.10. Mechanical part (diesel engines of 2,0 l)
2.11. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 







2-8-8-zamena-salnika-kolenvala-so-storony-cepnogo-privoda.html

2.8.8. Replacement of an epiploon of the crankshaft from the chain drive

Remove the check point.

Cars from the manual transmission
Remove press a clutch plate and a two-mass flywheel.

Cars with the automatic transmission
Remove the conducted clutch plate.
Take an epiploon by means of the lever.

Fig. 2.318. Extraction of an epiploon


Clear a working and landing surface (fig. 2.318).
Install the adjusting tool on the expansion plug and get an epiploon And on the expansion plug.

Fig. 2.319. The scheme of a motazh of an epiploon on the adjusting tool


Take the adjusting tool (fig. 2.319).

Fig. 2.320. Installation of the expansion plug with an epiploon on the crankshaft


Install the expansion plug with an epiploon 1 on the crankshaft (fig. 2.320).

Fig. 2.321. Epiploon press fitting


Epiploon with the plug evenly press aflush (fig. 2.321).
Further installation is carried out in the return sequence.

Cars from the manual transmission
Establish press a clutch plate and a two-mass flywheel.

Cars with the automatic transmission
Establish the conducted clutch plate.
Establish the check point.


2.8.7. Removal and installation of the conducted disk (cars with the automatic transmission)

2.8.9. Removal and installation of the left and right covers of driving chains