Service of Audi A4 from 2001 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
		2.1. General information
		2.2. Predvaritlny checks
		2.3. Mekhanichsky part (petrol engines 2,0l)
		2.4. Lubrication system
		2.5. Cooling system
		2.6. System of injection
		2.7. System of production of the fulfilled gases
		2.8. Mechanical part (petrol engines 3,0; 3,2 l)
		2.9. Mechanical part (petrol engines of 4,2 l)
		2.10. Mechanical part (diesel engines of 2,0 l)
			2.10.1. Number of the engine
			2.10.2. Glow plugs
			2.10.3. Removal and installation of a poliklinovy belt
			2.10.4. Removal and installation of a tension element of a poliklinovy belt
			2.10.5. Removal and installation of a quencher of tortional fluctuations
			2.10.6. Removal and installation of an arm of additional units
			2.10.7. Removal and installation of a gear belt
			2.10.8. Correction of phases of gas distribution
			2.10.9. Provorachivaniye of the crankshaft to VMT
			2.10.10. Sealing flanges and two-mass flywheel / flywheel
			2.10.11. Removal and installation of a flywheel, cars from multitronic
			2.10.12. Conrod and piston group
			2.10.13. Removal and installation of a cover of a head of the block of cylinders
			2.10.14. Repair of the valvate mechanism
			2.10.15. Removal and installation of cam-shafts
			2.10.16. Removal and installation of roller levers
			2.10.17. Replacement of oil scraper caps
			2.10.18. Check of hydraulic pushers
		2.11. Tables
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

2-10-11-snyatie-i-ustanovka-makhovika-avtomobili-s-multitronic.html

2.10.11. Removal and installation of a flywheel, cars from multitronic

Removal

Remove a quencher of tortional fluctuations.

Mark the provision of a flywheel to the engine.

Fig. 2.502. Installation of a countersupport

Establish a countersupport for untwisting of bolts (fig. 2.502).

Fig. 2.503. Fastening of a flywheel

Turn off a flywheel (fig. 2.503).

Installation

Installation is made in the return sequence, taking into account the following.

For fastening use new bolts.

Establish a countersupport for an inhaling of bolts.

Establish a quencher of tortional fluctuations.

Inhaling moment

Flywheel to the crankshaft, length of bolts * 22,5 mm: 60 N · m +90 ° **.

* Replace bolts.

** 90 ° there correspond quarters of a turn.