Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. Marking of KP
3.3.2. Volumes of gas station
3.3.3. Check of level of ATF oil and its filling
3.3.4. The general instructions for carrying out repair
3.3.5. Automatic transmissions electronic elements and places of their installation
3.3.6. Check of the drive of inclusion of transfers
3.3.7. Removal and installation of the drive of inclusion of transfers
3.3.8. Removal and installation of the handle of the automatic transmission selector
3.3.9. Adjustment of a cable of the automatic transmission selector
3.3.10. Removal and installation of the lock
3.3.11. Adjustment of the lock
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 







3-3-6-proverka-privoda-vklyucheniya-peredach.html

3.3.6. Check of the drive of inclusion of transfers

Check of functioning of the drive of inclusion of transfers
In provisions of the selector S, D, R and Tiptronic automatic transmission the starter should not join.
At speeds over 5 km/h and when switching the automatic transmission selector in situation "N" the electromagnet of blocking of the selector should not work and block the selector. The automatic transmission selector can be switched.
At speeds below 2 km/h (almost motionless state) and when switching the automatic transmission selector in situation "N" the electromagnet of blocking of the automatic transmission selector has to work only approximately through 1 page. The automatic transmission selector from situation "N" can be switched only at the pressed brake pedal.

The automatic transmission selector in situation "P" and ignition is included
Do not press a brake pedal.
The automatic transmission selector is blocked and cannot be switched from situation "P" even at the pressed button of blocking of the selector. The electromagnet of blocking of the automatic transmission selector blocks the selector.
Press a pedal of a brake and hold it.
The electromagnet of blocking of the automatic transmission selector will unblock the selector. Inclusion of transfer has to be possible at the pressed blocking button on the automatic transmission selector handle without "jamming".
Slowly switch the automatic transmission selector from situation "P" through provisions "R, N, D, S"; at the same time control that indications of the indicator of position of the automatic transmission selector in a combination of devices coincided with actual positions of the selector.

The automatic transmission selector in situation "N" and ignition is included
Do not press a brake pedal.
On boxes approximately to 08:01 g of release: the automatic transmission selector is blocked and it cannot be switched from situation "N", without pressing at the same time the blocking button on the selector handle. The electromagnet of blocking of the automatic transmission selector blocks the selector.
On boxes approximately from 08:01 g of release: at smooth switching through situation "N" (for example, from situation "R" in situation "D") the automatic transmission selector is blocked not at once. It allows "to shake" the car, for example, when slipping. If the automatic transmission selector at not pressed pedal of a brake is more than about 1 with is in situation "N", then blocking of the selector works.
Press a brake pedal.
The electromagnet of blocking of the automatic transmission selector will unblock the selector. Inclusion of transfer has to be possible at the pressed blocking button on the automatic transmission selector handle without "jamming".

The automatic transmission selector in situation "D", ignition is included
Transfer the automatic transmission selector to a groove of "Tiptronic".
Illumination of a D symbol on the panel of the drive of inclusion of transfers has to go out and "+" and "-" symbols have to be highlighted.
The indicator of position of the automatic transmission selector in a combination of devices when switching the automatic transmission selector in a groove of "Tiptronic" has to change the indication with "PRND" on "654321" or (from identification number of the car 8E_5400001) with "PRNDS" on "7654321".
If preset values are not received, adjust an automatic transmission selector cable.
Check blocking of the ignition key.

Check of blocking of the ignition key
Turn the ignition key in situation ("ignition is included").
Press a pedal of a brake and hold it.
Switching of the automatic transmission selector from situation "P" has to take place without "jamming" at the pressed blocking button on the automatic transmission selector handle.
Switch off ignition.
The ignition key should not be taken out in any position of the lever of the selector, except situation "P".
Transfer the automatic transmission selector to situation "P".
The ignition key "freely" turns in situation in which it can be pulled out.
Take out the ignition key.
The ignition key has to be taken out only when finding the automatic transmission selector in situation "P".
The automatic transmission selector at the clamped blocking button and the pressed pedal of a brake cannot be switched from situation "P".

Check of the blocking button on the automatic transmission selector handle
Pressing the blocking button has to take place without use of special efforts.
After an otpuskaniye of the blocking button it has to return to a starting position independently.
If preset values are not received, check correctness of installation of the handle of the automatic transmission selector.
Check draft of switching or the automatic transmission selector for a curvature.

Functioning check
Include ignition.
The blocking button on the handle of the automatic transmission selector has to be pressed for the following switchings or if it is not pressed, the automatic transmission selector cannot be switched to a standard position.
From situation "P" transfer the lever to situation "R" and in addition press a brake pedal.
From situation "D" pass into situation "S".
From situation "N" switch in situation "R"; during the parking, after some period, it is necessary to press a brake pedal in addition.
From situation "R" transfer to situation "P".
If preset values are not received, check correctness of installation of the handle of the automatic transmission selector.
Adjust an automatic transmission selector cable.


3.3.5. Automatic transmissions electronic elements and places of their installation

3.3.7. Removal and installation of the drive of inclusion of transfers