3.3.11. Adjustment of the lock

NOTE It agrees below to the provided instructions there is no need to remove the average console. Cut an adjusting template of the lock by a back part of a groove a grinding wheel.

Lower an adjustable steering column up to the end down and remove back to a driver's seat against the stop.

Remove the panel of the drive of inclusion of transfers.

Remove an ashtray of the average console

Weaken a bolt 1.

Fig. 3.105. Removal of the lock: 1 – lock

The support 2 locks has to move by hand (fig. 3.105).

Insert an adjusting template of the lock between a finger of the lever of the lock and an eye of the lock.

Pull for the lock and wrap a bolt the moment of 9 N · m.

Remove an adjusting template.

Check blocking of the ignition key after each adjustment of the lock.

The lock to a support: 9 N · m.