|
8-2-9-snyatie-i-ustanovka-vetrozashhitnogo-shhitka-lyuka-kryshi.html
8.2.9. Removal and installation of a wind-shelter guard of the hatch of a roof
|
|
Fig. 8.71. Roof hatch: 1 – kombi-screw (T 25) of 3 N · m; 2 – hatch panel engine; 3 – frame; 4 – fairing; 5 – rotary spring of a fairing
|
Removal
Completely open the hatch.
|
|
Fig. 8.72. Expression of a wind-shelter guard
|
Squeeze out a wind-shelter guard 2 in the direction of an arrow from the holder of 3 (fig. 8.72). Pull out a guard from a roof section down.
Installation
3 lay a spring around fixing teeth of a fairing 2.
Besides, enclose a spring in a flute of a guard (fig. 8.73).
|
NOTE
For descriptive reasons the holder 1 is represented in the removed look.
|
Advance an emphasis of 1 guard 2 under a section of a roof (fig. 8.72). Insert teeth of a wind-shelter guard in the holder 3.
On the opposite side slightly press a guard to the center of the car and record the second tooth in the holder.
|