|
8-2-1-snyatie-i-ustanovka-ramki-stekla-i-steklopodemnika-perednejj-dveri.html
8.2.1. Removal and installation of a frame of glass and window regulator of a forward doorRemoval
Remove a door upholstery.
Disconnect electric shtekerny connections.
Remove the window regulator electric motor.
Turn off bolts 7.
|
|
Fig. 8.57. Components of a window regulator of a forward door: 1 – the frame flew down; 2 – window regulator; 3 – forward door; 4 – Torx screw of 32 N · m; 5 – cap; 6 – an adjusting bolt with a fillet of 32 N · m; 7 – an adjusting bolt with a fillet of 6 N · m; 8 – Torx screw of 10 N · m; 9 – an adjusting bolt with a fillet of 32 N · m
|
Turn off bolts 6 and 9 and take out a glass frame with a window regulator from a door (fig. 8.57) up.
Installation
Before installation lower glass in a frame half.
Insert a frame and a window regulator into a door from above.
Frame the top half of a profile of consolidation on a door of glass.
Wrap fixing screws in the sequence 6; 9; 3; 8 and 10 but not to tighten (fig. 8.57). By hand tighten bolts with a fillet 6 and 9.
Slightly press the top part of a frame of glass 1 in the direction inside.
Tighten bolts the 4 and 8 moment of 32 N · m.
Tighten bolts with a fillet the 6 and 9 moment of 32 N · m.
Tighten a bolt the 10th moment of 10 N · m.
Tighten the fixing bolt (shooter) in a glass frame the moment of 32 N · m.
|