Removal of the lock of a door. Audi A4 (from 2001 to 2005 release)
Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.2. Doors, locks of doors and hatch of a roof
8.2.1. Removal and installation of a frame of glass and window regulator of a forward door
8.2.2. Removal and installation of the electric motor of a window regulator
8.2.3. Adjustment of a forward door
8.2.4. Removal of the handle of a door
8.2.5. Removal of the lock of a door
8.2.6. Repair of the central lock
8.2.7. Removal and installation of a frame of glass and window regulator of a back door
8.2.8. Adjustment of a back door
8.2.9. Removal and installation of a wind-shelter guard of the hatch of a roof
8.2.10. Removal and installation of a sun-protection blind
8.2.11. Removal and installation of a slip
8.2.12. Adjustment of a cover of the lifting and movable hatch
8.2.13. Replacement of a sealant of the panel of the hatch
8.2.14. Cleaning of drainage hoses
8.3. Body glazing
9. Schemes of electric equipment
 







8-2-5-snyatie-zamka-dveri.html

8.2.5. Removal of the lock of a door

Removal
The upholstery of a door has to be removed.
The frame flew down and a window regulator also have to be removed. Disconnect electric shtekerny connection of the lock of a door.
If the same lock of a door is put again, then take away driving thirst for the door handle.
If the lock of a door is replaced, then bring driving thirst for the door lock.
Razblokruyte driving draft on the sliding coupling from the door lock.

Fig. 8.65. Door lock: 1 – the screw with an internal polyhedron of M8 20 N · m; 2 – laying; 3 – door lock; 4 – opening lever; 5 – flexible cable of the internal handle of opening of a door


Unscrew screws with an internal asterisk 1 and to take the lock of a door (fig. 8.65).

Installation
Installation is made in the return sequence.
As shown in a figure 8.65 fragment, for installation at first insert vertically into the opening lever, then turn on 90 ° and block in the door lock.


8.2.4. Removal of the handle of a door

8.2.6. Repair of the central lock