Removal of the handle of a door. Audi A4 (from 2001 to 2005 release)
Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.2. Doors, locks of doors and hatch of a roof
8.2.1. Removal and installation of a frame of glass and window regulator of a forward door
8.2.2. Removal and installation of the electric motor of a window regulator
8.2.3. Adjustment of a forward door
8.2.4. Removal of the handle of a door
8.2.5. Removal of the lock of a door
8.2.6. Repair of the central lock
8.2.7. Removal and installation of a frame of glass and window regulator of a back door
8.2.8. Adjustment of a back door
8.2.9. Removal and installation of a wind-shelter guard of the hatch of a roof
8.2.10. Removal and installation of a sun-protection blind
8.2.11. Removal and installation of a slip
8.2.12. Adjustment of a cover of the lifting and movable hatch
8.2.13. Replacement of a sealant of the panel of the hatch
8.2.14. Cleaning of drainage hoses
8.3. Body glazing
9. Schemes of electric equipment
 







8-2-4-snyatie-ruchki-dveri.html

8.2.4. Removal of the handle of a door

Removal

Fig. 8.63. The door handle (to identification number of the car 400 000): 1 – door handle; 2 – clip; 3 – driving draft; 4 – the sliding coupling; 5 – lock finger; 6 – door lock


At removal of the handle of a door 1 unblock driving draft of 3 (fig. 8.63).
Before removal of the handle of a door disconnect from a clip of 2 (fig. 8.63).

Installation
After installation of the new lock of a door at first insert driving draft into the sliding coupling and record it.
After that take out a safety pin 5 of the lock of a door (fig. 8.63).
For fixing of driving draft 3, move the sliding coupling 4 up.
Take out a lock finger after installation of driving draft 3.

Accession of driving thirst for the door lock

Fig. 8.64. Accession of driving thirst for the door lock


At installation of the new lock of a door block driving draft 1 in the sliding coupling (fig. 8.64).
For fixing of driving draft move a pusher 2 sliding couplings (fig. 8.64) up.
Take out a safety pin 3 of the door lock.


8.2.3. Adjustment of a forward door

8.2.5. Removal of the lock of a door