Removal and installation of a gas emphasis of a cover of a luggage compartment. Audi A4 (from 2001 to 2005 release)
Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.1.1. Removal and installation of a front bumper
8.1.2. Removal and installation of a connecting level of a roof "sedan"
8.1.3. Removal and installation of a connecting level of a roof "Avant"
8.1.4. Removal and installation of railings
8.1.5. Replacement of side protective levels
8.1.6. Removal and installation of an overlay of a threshold
8.1.7. Removal and installation of an overlay of a threshold S4
8.1.8. Removal and installation of a rear-view mirror
8.1.9. Mirror glass installation
8.1.10. Removal and installation of the electric motor of adjustment of a mirror
8.1.11. Removal and installation of a rear-view mirror of RS4
8.1.12. Removal and installation of the forward flap
8.1.13. Removal and installation of the back flap
8.1.14. Removal, installation and adjustment of a cowl (to identification number of the car 400 000)
8.1.15. Removal and installation of a gas emphasis (starting with identification number of the car 400 001)
8.1.16. Removal and installation of a gas emphasis
8.1.17. Adjustment on height of buffers
8.1.18. Removal and installation of a front grille
8.1.19. Removal and installation of a hook (up to identification number of the car 400 000)
8.1.20. Removal and installation of the lower part of the lock of a cowl
8.1.21. Adjustment of buffers of a frame
8.1.22. Removal and installation of a door of a luggage compartment
8.1.23. Removal and installation of an emphasis
8.1.24. Adjustment of a door of a luggage compartment
8.1.25. Installation of consolidation of a cover of a luggage compartment
8.1.26. Removal and installation of a cover of a luggage compartment
8.1.27. Adjustment of a cover of a luggage compartment
8.1.28. Removal and installation of the hinge of a cover of a luggage compartment
8.1.29. Removal and installation of a gas emphasis of a cover of a luggage compartment
8.1.30. Removal and installation of the cylinder of the lock of a cover of a luggage compartment
8.1.31. Removal and installation of a level of the handle of a cover of a luggage compartment
8.2. Doors, locks of doors and hatch of a roof
8.3. Body glazing
9. Schemes of electric equipment
 







8-1-29-snyatie-i-ustanovka-gazovogo-upora-kryshki-bagazhnogo-otseka.html

8.1.29. Removal and installation of a gas emphasis of a cover of a luggage compartment

Removal
Open a cover of a luggage compartment and prop up.

Fig. 8.47. Removal of a gas support


3 raise the holding spring by means of the screw-driver according to the drawing and pull together a gas support 1 from the top spherical head of 2 (fig. 8.47).

NOTE
After full removal of a gas support pay attention to the correct situation at installation.
The shock-absorbing element has to be attached to a body.

Installation
Installation is carried out in the return sequence.
At installation the gas support is got only on a spherical head.
Moment of an inhaling of a spherical head of 15 N · m.

Removal and installation of consolidation of a cover of a luggage compartment
Open a cover of a luggage compartment and remove consolidation.
At installation at first establish consolidation in the left and right corner.

Fig. 8.54. Installation of consolidation of a cover of a luggage compartment


1 establish consolidation on a body as it is represented in the figure 8.54.


8.1.28. Removal and installation of the hinge of a cover of a luggage compartment

8.1.30. Removal and installation of the cylinder of the lock of a cover of a luggage compartment