Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Hinged elements of a body
8.1.1. Removal and installation of a front bumper
8.1.2. Removal and installation of a connecting level of a roof "sedan"
8.1.3. Removal and installation of a connecting level of a roof "Avant"
8.1.4. Removal and installation of railings
8.1.5. Replacement of side protective levels
8.1.6. Removal and installation of an overlay of a threshold
8.1.7. Removal and installation of an overlay of a threshold S4
8.1.8. Removal and installation of a rear-view mirror
8.1.9. Mirror glass installation
8.1.10. Removal and installation of the electric motor of adjustment of a mirror
8.1.11. Removal and installation of a rear-view mirror of RS4
8.1.12. Removal and installation of the forward flap
8.1.13. Removal and installation of the back flap
8.1.14. Removal, installation and adjustment of a cowl (to identification number of the car 400 000)
8.1.15. Removal and installation of a gas emphasis (starting with identification number of the car 400 001)
8.1.16. Removal and installation of a gas emphasis
8.1.17. Adjustment on height of buffers
8.1.18. Removal and installation of a front grille
8.1.19. Removal and installation of a hook (up to identification number of the car 400 000)
8.1.20. Removal and installation of the lower part of the lock of a cowl
8.1.21. Adjustment of buffers of a frame
8.1.22. Removal and installation of a door of a luggage compartment
8.1.23. Removal and installation of an emphasis
8.1.24. Adjustment of a door of a luggage compartment
8.1.25. Installation of consolidation of a cover of a luggage compartment
8.1.26. Removal and installation of a cover of a luggage compartment
8.1.27. Adjustment of a cover of a luggage compartment
8.1.28. Removal and installation of the hinge of a cover of a luggage compartment
8.1.29. Removal and installation of a gas emphasis of a cover of a luggage compartment
8.1.30. Removal and installation of the cylinder of the lock of a cover of a luggage compartment
8.1.31. Removal and installation of a level of the handle of a cover of a luggage compartment
8.2. Doors, locks of doors and hatch of a roof
8.3. Body glazing
9. Schemes of electric equipment
 







8-1-24-regulirovka-dveri-bagazhnogo-otseka.html

8.1.24. Adjustment of a door of a luggage compartment

Fig. 8.43. Adjustment of a door of a luggage compartment


Remove a covering of a trailer element (fig. 8.43).

NOTE
Before adjustment of a new cover establish a gas emphasis.

Weaken nuts 1, the bracket of the lock 2 has to have a possibility of movement (fig. 8.43).
Carefully close a cover until it is not established aflush with a wing.
Carefully open a cover and wrap nuts 1 moment of 8 N · m (fig. 8.43).

Facing of a cover (only in RS4)

Fig. 8.44. Facing of a cover


Facing is pasted. For dismantle heat it the hair dryer from the inside and remove (fig. 8.44).

NOTE
On the surface of glue connection there should not be a dust and oil.

Clear the surface of glue connection by means of D 009 401 04 if necessary completely remove the glue remains.
Remove a protective layer of paper from an adhesive tape and press facing 1 to a cover, precisely observing at the same time contours (fig. 8.44).


8.1.23. Removal and installation of an emphasis

8.1.25. Installation of consolidation of a cover of a luggage compartment