8.1.16. Removal and installation of a gas emphasis
Put a cowl on a support or fix in order to avoid falling.
Fig. 8.32. Unblocking of a gas emphasis of a cowl
Raise the holding springs on both ends of a gas emphasis by means of the screw-driver and a razblokruyta a gas emphasis (fig. 8.32)
For installation establish a gas emphasis on a spherical pin and record.
The tube of a gas emphasis is established on a body.
Production of gas from a gas emphasis
Clamp a gas emphasis in the mm zone x=50 in a vice.
Zazhatiye is allowed to be made only in the field of specified in the figure 8.33, otherwise there is a danger of accident
Cover a zone under the place of cutting with a rag for collecting splashes of oil.
During cutting surely use goggles.
Make an incision the cylinder of a gas emphasis in the first third of all length of the cylinder, considering from edge on the party of a rod.