1.3.2. Control lamps of a combination of devices

Fig. 1.40. Control lamps of a combination of devices

Control lamps signal about a condition of certain functions / malfunctions.

On some cars the symbol of parking fires is on light switch / switch.

NOTE A number of functions is controlled by the control system of malfunctions. Functional violations are brought to the display of a combination of devices as red symbols (a priority 1 – danger) or yellow symbols (a priority 2 – the prevention).

The control lamp signals about malfunction in the control system of the fulfilled gases. As soon as possible address on the specialized enterprise and remove a cause of defect.

The control lamp monitors work of system of pillows and natyazhitel of tapes of seat belts.

The control lamp lights up for several seconds at inclusion of ignition.

The system is faulty if the control lamp does not die away after inclusion of ignition or lights up, blinks/flickers during the movement, and also does not light up at inclusion of ignition.

ATTENTION In case of malfunction of system check it at the specialized enterprise. Otherwise there is a danger that at accident there will be no regular operation of system of pillows or natyazhitel of tapes of seat belts.

The control lamp in a combination of devices burns during the work of system of regulation of speed.

At the movement with the trailer the control lamp blinks together with the included indexes of turn.

The control lamp blinks at inclusion of indexes of turn, only if the trailer is correctly connected to the car.

At malfunction of a lamp of the index of turn on the car or the trailer the control lamp does not blink.

Control lamp of the ABS function and device of electronic blocking of differential (EDS).

The control lamp lights up for several seconds at inclusion of ignition / during launch of the engine and has to go out after the end of automatic process of control.

The ABS device is faulty if:

– the control lamp does not light up at inclusion of ignition;

– the control lamp does not die away several seconds later;

– the control lamp lights up on the run.

In this case braking of the car only with use of the ordinary brake system, i.e. without ABS is possible. As soon as possible address on the specialized enterprise. At malfunction of ABS the control lamp of ESP burns.

If the control lamp of ABS burns together with a control lamp of the brake system (at the released emergency brake), then in this case the refusal not only the regulating ABS function, but also malfunction of the brake system takes place.

In case of functional violation of the brake system on the display of a combination of devices the symbol appears.

The EDS device works together with ABS. About failure of the EDS device fire of a control lamp of ABS signals. As soon as possible address on the specialized enterprise.

ATTENTION At fire of a control lamp of the brake system together with a control lamp of ABS stop at once and check the level of brake fluid in a filling tank. When falling level of brake fluid below the mark "MIN" the further movement is not allowed. At the normal level of brake fluid the reason can consist in malfunction of ABS. With failure of the regulating ABS function when braking rather bystry blocking of back wheels can take place. Under certain circumstances it can lead to a drift of the back bridge of the car.

The control lamp lights up after inclusion of ignition and burns until the seat belt of the driver / the forward passenger is fastened. Beginning about 10 km/h from car speed the warning signal (zoom) in addition sounds.

The control lamp blinks together with the included indexes of turn.

Depending on the included indexes of turn the left or right control lamp blinks. At the switched-on alarm light system both control lamps of indexes of turn blink at the same time.

At refusal of one of indexes of turn the control lamp blinks twice more often.

This case does not belong to the movement with the trailer. At malfunction of any lamp of the index of turn on the car or the trailer the control lamp does not blink.

The control lamp monitors function of electronic system of dynamic stabilization.

The lamp blinks during the movement during the operation of the ESP device.

The lamp lights up for control of function at inclusion of ignition and has to go out approximately through 2 pages.

The lamp burns at malfunction of ESP.

The lamp burns after shutdown and the subsequent connection of the accumulator.

The lamp burns at the switched-off ESP device.

The lamp burns also at ABS refusal as the ESP device works together with ABS.

At fire of a control lamp right after launch of the engine there can be a protective shutdown of ESP caused by system. In this case you it is possible to include ESP switching off and the subsequent inclusion of ignition. When the control lamp goes out, the device is completely ready for operation.

In case of shutdown and the subsequent connection of the accumulator the control lamp lights up after inclusion of ignition. that the lamp went out, rather short movement on a straight line.

The control lamp signals about defect of the generator or malfunction of electric equipment of the car.

The control lamp lights up at inclusion of ignition and has to go out after launch of the engine.

If the lamp lights up during the movement of the car, then, as a rule, still it is possible to reach to the nearest specialized enterprise. As at the same time, however, there is a continuous category of the accumulator, it is necessary to switch off everything consumers of current, except the most necessary.

ATTENTION Fire in a combination of devices during the movement of in addition alarm symbol of malfunction of the cooling system testifies to malfunction of the water pump of the cooling system. Immediately stop and kill the engine.

The control lamp burns at the turned-on driving beam.

The control lamp lights up at inclusion of driving beam or when using of a faltering light signal.

The control lamp burns at the included parking fires.

The control lamp watches a control system of the petrol engine.

The control lamp ("Electronic Power Control") lights up at inclusion of ignition for control of function of system.

NOTE Fire of a control lamp during the movement testifies to malfunction in a control system of the engine. Urgently address on the specialized enterprise for check of the engine.

The control lamp burns in the course of a prestarting warming up of the engine.

Fire of a control lamp testifies to a prestarting warming up of the engine. You start the engine at once as soon as the lamp goes out. At launch of the heated-up engine, and also at an external temperature above +8 °C the control lamp lights up only approximately on 1 page.

NOTE The blinking of a control lamp of system of a prestarting warming up during the movement testifies to malfunction in a control system of the engine. The engine needs urgent check. Malfunction in system of a prestarting warming up can be the reason that the control lamp at inclusion of ignition does not light up at all.

The control lamp blinks at too low level of brake fluid, malfunction of the ABS device or at the tightened emergency brake.

In case of a blinking of a control lamp (at the released emergency brake) stop and check the level of brake fluid.

At ABS refusal the control lamp of ABS lights up together with a control lamp of the brake system.

The control lamp burns also at the tightened emergency brake. Besides, at the movement more than 3 with with a speed over 5 km/h the buzzer sounds and alarm indication is brought to the display.

ATTENTION If the control lamp of the brake system does not die away or lights up on the run, then it demonstrates falling of level of brake fluid in a filling tank. Stop and use the qualified help.