1.3.10. Mate rear-view mirror
Internal mirror with manual shielding (normal situation)
Take away the rychazhok located from the lower party of a mirror forward.
Provision of shielding
Take away the rychazhok located from the lower party of a mirror back.
Internal mirror with automatic shielding
Function of automatic shielding can be disconnected and included if necessary.
Shielding function switching off
Press a key A
, at the same time the control lamp In (fig. 1.92)
|Fig. 1.92. A control lamp and a key of inclusion/switching off of the shielded internal mirror
Function inclusion shielding
Press a key A, at the same time the control lamp of Century burns.
Function of automatic shielding joins every time at inclusion of ignition. In the case of a mirror the green control lamp burns.
At the included function of shielding there is an automatic shielding of light of an internal mirror depending on light stream falling on it. Also at the included function shielding of a mirror does not happen in the following cases:
– at inclusion of internal lighting;
– at inclusion of transfer of a backing.
Sensors of automatic light of headlights
When finding the switch of light in the provision of "AUTO" by means of the sensors mounted in the case of a mirror depending on external illumination passing beam automatically is turned on and switched off.
In case of switching off of function of shielding of an internal rear-view mirror also function of automatic shielding of external mirrors is turned off.
Trouble-free function of automatic shielding of mirrors is possible only at the removed sun-protection curtain of back glass and when nothing interferes with the stream of light falling on an internal mirror.
Do not place on a windshield before sticker sensors to exclude violation/refusal of function of automatic light of headlights and automatic shielding of a mirror.