1.3.11. External mirrors

The provision of external mirrors is regulated by the electric drive.

Fig. 1.93. Multiposition switch of an external mirror

Rotation of the multiposition switch (button) carries out switching to the left external mirror of L or the right external mirror of R (fig. 1.93).

Pressing of the button in the directions specified by shooters so adjust a reflective surface of external mirrors that the sufficient rearview was provided.

Turn the button in situation A.

It is recommended to put external mirrors, for example, for their preservation at the parking or in narrow spaces.

The reflective surface of external mirrors is warmed at the included heating of back glass depending on external temperature.

When switching the electric drive to a mirror of the party the forward passenger (situation R) and inclusion of transfer of a backing the reflective surface of a mirror slightly deviates down. Thereby visibility of curbstone at the parking is provided.

The mirror comes back to a starting position after switching off of transfer of a backing and the movement of the car with a speed more than 15 km/h or when switching the electric drive to a mirror of the driver of L or switching in neutral situation 0 forward.

When programming provision of a seat of the driver of cars with the memory device of provision of a seat of the driver also standard position of external mirrors is automatically programmed.

ATTENTION Convex and aspherical mirrors increase the sector of the review. However they reduce the image of objects. Therefore such mirrors are only conditionally suitable for distance assessment to the vehicles moving behind.

At mirror shift as a result of influence of external forces (for example, blow when maneuvering) carry out full electric folding of mirrors. Do not establish a mirror in a starting position at all by a hand as it can negatively influence their mechanical function.

NOTE In case of refusal the electric drive be taken by the edge of a mirror by a hand and establish it by pressing edge of a reflective surface.

External mirrors are shielded automatically together with an internal mirror. At the included ignition there is an automatic shielding of light of mirrors depending on light stream falling on them (for example, light of headlights behind).

At inclusion of illumination of salon or transfer of a backing of a mirror come back to a starting position (without light shielding).

NOTE In case of function of shielding of an internal rear-view mirror also function of automatic shielding of external mirrors is turned off. Trouble-free function of automatic shielding of a mirror is possible only at the removed sun-protection curtain of back glass and when nothing interferes with the stream of light falling on an internal mirror.