Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. Preliminary checks
6.2. Repair of the brake system
6.3. Repair of brakes of forward wheels
6.3.1. Removal and installation of brake shoes
6.3.2. Brake of forward wheels of FN3
6.3.3. Removal and installation of brake shoes
6.3.4. Ceramic brake of forward wheels of CSIC
6.3.5. Removal and installation of brake shoes
6.3.6. Removal and installation of brake shoes (brake of back wheels of C38)
6.3.7. Brake of back wheels of RS4 (TIP 8ES)/S43
6.3.8. Removal and installation of cables of the parking brake, cars with the forward drive
6.3.9. Removal and installation of cables of the parking brake (cars with the four-wheel drive)
6.3.10. Removal and installation of the lever of the emergency brake
6.3.11. Removal and installation of a basic pillow for a brake pedal
6.4. ABS system
6.5. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 







6-3-remont-tormozov-perednikh-koles.html

6.3. Repair of brakes of forward wheels





Fig. 6.28. Components of a forward brake: 1 – cover of a brake disk; 2 – flange bolt, 10 N · m; 3 – brake hose; 4 – spring bracket; 5 – brake pipeline, 15 N · m; 6 – самоконтрящийся bolt, 30 N · m; 7 – bolt, 190 N · m; 8 – a bracket holder with the directing fingers and a protective cap; 9 – brake disk; 10 – wheel bolts; 11 – TORX screw; 12 – heat-shielding screen; 13 – case of a brake support; 14 – holder; 15 – a bolt with a six-sided head, 10 N · m; 16 – brake shoes; 17 – shtekerny connection; 18 – holder



NOTE
After replacement of brake shoes several times strongly press a brake pedal. It is necessary in order that brake shoes reached the working position.
For pumping of brake fluid from a broad tank use capacity for pumping out which adjoins only to brake fluid. Brake fluid is toxic agent therefore it cannot be pumped out a mouth through a hose at all.
When replacing components of the brake system (a brake disk, a brake support or a brake shoe) surely pay attention to correctness of identification. The correct identification as the car is an initial condition for correct work of the ESP system.



6.2.4. Electric vacuum pump

6.3.1. Removal and installation of brake shoes