Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. Preliminary checks
6.2. Repair of the brake system
6.3. Repair of brakes of forward wheels
6.3.1. Removal and installation of brake shoes
6.3.2. Brake of forward wheels of FN3
6.3.3. Removal and installation of brake shoes
6.3.4. Ceramic brake of forward wheels of CSIC
6.3.5. Removal and installation of brake shoes
6.3.6. Removal and installation of brake shoes (brake of back wheels of C38)
6.3.7. Brake of back wheels of RS4 (TIP 8ES)/S43
6.3.8. Removal and installation of cables of the parking brake, cars with the forward drive
6.3.9. Removal and installation of cables of the parking brake (cars with the four-wheel drive)
6.3.10. Removal and installation of the lever of the emergency brake
6.3.11. Removal and installation of a basic pillow for a brake pedal
6.4. ABS system
6.5. Tables
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 







6-3-8-snyatie-i-ustanovka-trosov-stoyanochnogo-tormoza-avtomobili-s-perednim-privodom.html

6.3.8. Removal and installation of cables of the parking brake, cars with the forward drive

Removal
Remove the extender of the central console.
Remove wheels
Remove flooring in a back part at the left and on the right and to rasklipsovat cables of the parking brake
Flooring fastens прибл at the left. 8 screws
Remove flooring inside on system of release of OG
Disconnect a back exhaust pipe

Fig. 6.47. Lock washer of a cable of the parking brake


Take a lock washer 1 and to unhook cables of the parking brake from a support (fig. 6.47).

NOTE
Do not damage a corrugated cover of a cable of the parking brake at removal and installation.


Fig. 6.48. Release of the brake pipeline


Release the brake pipeline 2 of the holder of 3 (fig. 6.48).

Fig. 6.49. Release of a cable of the parking brake


Exempt cables of the parking brake 1 from the fuel tank (clip) of 2 (fig. 6.49).

Fig. 6.50. Holder of a cable of the parking brake


Release cables of the parking brake 3 of the holder of 1 (fig. 6.50).
To have an opportunity hang new cables, it is necessary to remove the lever of the parking brake and to install the mechanism in a starting position.

Installation

Fig. 6.51. Installation of a cable of the parking brake


Block a cable against the stop (fig. 6.51).

NOTE
In a crossing point the cable 1 has to lie under a cable 2.

Block a cable in the holders provided for this purpose.
The tightening loop of the holder has to be between both rings for positioning of 4 (fig. 6.50).
Moment of an inhaling of poses. 2: 25 N · m
Fix a cable of the parking brake on the bottom or on a tank.

NOTE
Do not damage a corrugated cover of a cable of the parking brake at removal and installation.

Hang a cable of the parking brake on a brake support and establish a lock washer of 1 (fig. 6.47).

Fig. 6.52. Rings for positioning of a cable


Rings 1 for positioning of a cable have to is in a clip of the holder (fig. 6.52).
Moment of an inhaling of poses. 2: 25 N · m
Mount heat-insulating screens.
Install the extender of the central console.
Adjust the emergency brake.


6.3.7. Brake of back wheels of RS4 (TIP 8ES)/S43

6.3.9. Removal and installation of cables of the parking brake (cars with the four-wheel drive)