Service of Audi A4 from 2001 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. Six-speed transmission 0A3 (four-wheel drive)
3.2.2. Six-speed transmission 01E/0A1 (forward drive)
3.2.3. General recommendations about prevention and repair of mechanical transmissions
3.2.4. Check of level of gearbox oil in the mechanical transmission
3.2.5. Removal and installation of a knob with a cover
3.2.6. Removal and installation of the drive of gear shifting
3.2.7. Adjustment of the drive of gear shifting
3.2.8. Removal and installation of a pillow of the transmission
3.2.9. Removal and installation of lock plugs of a shaft of gear shifting at the installed transmission
3.2.10. Removal of switches of lamps of a backing
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 




Все про автомобили: https://auto-magazine.net | Свежие новости тут: https://maxi-credit.ru | Автомобильные новости: http://autosaity.ru | Интересное про мам: https://gelschool.ru | Читаем здесь: https://furycoins.ru



3-2-10-snyatie-vyklyuchatelejj-fonarejj-zadnego-khoda.html

3.2.10. Removal of switches of lamps of a backing

Removal
Weaken clamps 3 (in the presence) and remove the back noise-insulating screen B (fig. 3.1).

Fig. 3.1. Fastening of a noise isolation



Fig. 3.76. Shtekerny socket of the right switch of lamps of a backing


Disconnect the shtekerny socket from the right switch of lamps of a backing at the check point (fig. 3.76).
Remove the switch of lamps of a backing from a gear shifting drive cover.

Installation
The moment of 20 N · m wrap the switch of lamps of a backing on a gear shifting drive cover.
Connect the shtekerny socket to the right switch of lamps of a backing at the check point.
Install the back noise-insulating screen B (fig. 3.1).


3.2.9. Removal and installation of lock plugs of a shaft of gear shifting at the installed transmission

3.3. Automatic transmission