|
5-1-2-prokachka-sistemy-rulevogo-upravleniya.html
5.1.2. Pumping of system of steeringAfter works on system of steering its pumping which can be various depending on amount of completed work is made.
After replacement of steering in collecting or after replacement of the amplifier
Check the level of oil of hydraulic system and if necessary add.
Raise the car so that forward wheels were released.
For a short time start the engine (max. 2 pages)
Air therefore a steering wheel you do not twist it should not get to the pump.
Intervals between starts of the engine about 30 pages.
Check the level of oil of hydraulic system and if necessary add.
Repeat operations while the level of oil is not stabilized.
At the switched-off engine of 10 times turn a steering wheel from an emphasis against the stop.
Check the level of oil of hydraulic system and if necessary add.
The air which remained in system will go to time of the movement of the car approximately through 10–20 km independently.
When replacing an element of steering, except the amplifier (the pump, hoses, etc.)
Check the level of oil of hydraulic system and if necessary add.
For a short time start the engine (max. 2 pages)
Air therefore a steering wheel you do not twist it should not get to the pump.
Intervals between starts of the engine about 30 pages.
Check the level of oil of hydraulic system and if necessary add.
Repeat operations while the level of oil is not stabilized.
Start the engine and leave to work 2–3 min., you do not twist a steering wheel.
The air which remained in system will go to time of the movement of the car approximately through 10–20 km independently.
|