|
7-4-3-avtomobili-s-6-cilindrovym-benzinovym-dvigatelem-fsi-3-2-l.html
7.4.3. Cars with the 6-cylinder petrol FSI engine of 3,2 lRemoval
Disconnect a weight wire in the accumulator at the switched-off ignition.
Remove the right forward wheel.
|
NOTE
Record a brake disk a wheel bolt.
|
In cars with an autonomous heater unscrew screws of an exhaust pipe of an autonomous heater and additional heater on the noise-insulating screen.
|
|
Fig. 7.18. Fastening of the forward noise-insulating screen
|
Release quick disconnect clamps 1–3 and remove forward and back noise-insulating screens (fig. 7.18).
|
|
Fig. 7.65. Heat-shielding screen of the right power shaft
|
Turn off the heat-shielding screen of the right power shaft (fig. 7.65).
Cars with the automatic transmission
Turn off the right power shaft from a transmission flange.
All cars
Remove electric cables 2 and 3 from a starter (fig. 7.66).
Cars with the automatic transmission
Take a starter from a wheel arch the movement back.
Cars with the mechanical transmission
Take a starter between a stretcher and the transmission.
All cars
|
NOTE
For the best perception operation is shown at the removed engine support.
|
Installation
Establish in the return sequence.
Establish the right power shaft.
Connect the accumulator.
Inhaling moments
Starter to the transmission: 65 N · m.
The B+ plug to a starter: 16 N · m.
The heat-shielding screen of a power shaft to the transmission: 23 N · m.
|