|
6-2-3-snyatie-i-ustanovka-datchika-davleniya-usilitelya-tormoznogo-privoda.html
6.2.3. Removal and installation of the sensor of pressure of the amplifier of the brake driveRemoval
Uncover the water taking away box.
Disconnect the electric socket the movement down.
|
|
Fig. 6.25. Screws of fastening of the electric socket
|
|
NOTE
Pressure sensor can also be заклипсован.
|
|
Fig. 6.26. Components of the vacuum pump: 1 – amplifier of the brake drive; 2 – vacuum line; 3 – hose clip; 4 – pressure sensor; 5 – backpressure valve
|
Disconnect the vacuum pump of brakes from the backpressure valve, as shown in the figure 6.26.
Take pressure sensor.
|
Installation
Installation is carried out in the return sequence.
Check of the backpressure valve
Air has to pass through the backpressure valve A
In the opposite direction the valve has to remain closed.
You watch correctness of assembly situation.
|