6.1.4. Visual check of the brake system on existence of leakage and damages
Check tightness and absence of damage of the following structural elements:
– main brake cylinder;
– amplifier of the drive of brakes;
– hydraulic ABS block;
– brake supports.
Pay attention to that brake hoses were not overwound.
Make sure that at turn of a wheel against the stop brake hoses do not concern other structural elements.
Be convinced of lack of a time, cracking and bubbles on brake hoses.
Check lack of traces of attrition on brake hoses and brake tubes.
Check connecting unions and elements of fastening of brake tubes for the correct assembly provision, tightness and lack of corrosion.
The found damages are subject to obligatory elimination.